Payment & Shipping Terms:
|BMS Maximum Charge Current:||100A(120A Is Available）||Expected Cycle Life:||Round 3,000 Cycles@100%DOD,1C At 25℃|
|Peak Discharge Current:||300A (2S)||Enclosure Protection:||Pure ABS|
|Communication:||Bleutooth For Option||Enclosure Protection:||IP56|
4S17P solar charger lithium battery,
100Ah pylontech lithium battery,
4S17P Rechargeable Solar Panel Battery
MaxLi 100ah Lifepo4 Batteri BMS IP65 Housing with M8 Connector for Camper/Boat/Solar System
3 YEAR WARRANTY
World beating, best in class, three year manufacturer defect warranty.
100 ampere hours. MaxLi Lithium batteries provide consistent power for all 100 amp hours. MaxLi LiFePO4 batteries have a flat voltage curve, which means they have a steady power output as the battery discharges. The power output will not dramatically drop like similar sized SLA batteries. You get all the juice down to the last drop.
LIFECYCLES (BATTERY LIFESPAN)
Up to 100% capacity for 3,000 cycles in recommended conditions. The typical SLA has 400 cycles. MaxLi Lithium batteries last so long that the price per use is a fraction of traditional batteries.
50 A max, 14.6 V max recommended. Please note: this battery should be charged using a LiFePO4 compatible charger.
100A max continuous, 300 A max pulse (<3 sec). The flat discharge voltage curve provides a 75% bigger capacity then a SLA 100Ah battery.
Smart Built-in BMS
passive balancing(active balance optional), low voltage cutoff, high voltage cutoff, short circuit protection and temperature protection for increased performance and longer life. Besies, Bluetooth function for option that enables to monitor battery status, such as, voltage, capacity and so on.
Charge Temp: 0℃ to 45℃(32F to 113F) @ 60%+-25% relative hunmidity
Discharge Temp: -20℃ to 60℃(-4F to 140F) @ 60%+-25% relative hunmidity
Storage Temp: -20℃ to 60℃(-4F to 140F) @ 60%+-25% relative hunmidity
Q1: Are you a Factory or trading company?
A: We are manufacturer locates in Dongguan with integrated design, develop, manufacture, quality control and after sales. We are experienced in OEM/ODM project and you are welcomed to visit our company.
Q2: When can I get the price?
A: Our sales will quote to you within 24 hours exclude public holiday.
Q3: How can I get a sample to check your quality?
A: After sample price confirmation, we will provide samples as soon as possible for your testing.
Q4: What is the lead time for mass production?
A: It depends on our stock. If we have stock, and the lead time will be within 30 days. If not, we will start to make your orders after receiving deposit and update lead time with you in 48 hours.
Q5: What is your payment term?
A: We can accept TT, LC, PAYPAL,, etc.
Q6: How about the shipment?
A: We can ship the goods by air , by sea or by express
Contact Person: Monica Chen